Input Supply Voltage: 2.8 V, 1.2 V, 2.5 V to 3.Sensor Technology: Uncooled VOx microbolometer. ![]() I decided a thermal imaging camera would be a good tool to have and decided to build my own. ![]() The Lepton 3.5 can output absolute temperature data (Radiometric) at 160x120 pixel resolution. Non-Uniformity Correction (NUC): Automatic with shutter I bought a FLIR Lepton 3.5 mounted on the Pure Engineering breakout after using a friend's thermal imaging camera to analyze heat generation on a PCB I designed.Image Optimization: Factory configured and fully automated.Array format: 80 × 60, progressive scan.Optimum Temperature Range: -10☌ to +80☌.Non-Operating Temperature Range: -40 ☌ to +80 ☌.Mechanical Interface: 32–pin socket interface to standard Molex® socket.Package Dimensions - Socket Version (w x l x h): 11.8 x 12.7 x 7.2 mm. ![]() Control Port: CCI (I2C-like), CMOS IO Voltage Levels.Output image independent of camera temperature. Spectral Range: Longwave infrared, 8 µm to 14 µm.Scene Dynamic Range: -10-140 ☌ (high gain) up to 450☌ (low gain) typical.Radiometric Accuracy: High gain: Greater of +/- 5☌ or 5% (typical) Low gain: Greater of +/- 10☌ or 10% (typical).Output Format: User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied).Input Clock: 25-MHz nominal, CMOS IO Voltage Levels.It is specifically designed to fit inside a. your thermal camera, through the dedicated Skycontroller 3 symbol. FLIR Lepton LWIR thermal imaging camera and Microsemi IGLOO2 FPGA The Future Electronics System Design Center (SDC) developed a thermal imaging video. Effective Frame Rate: 8.6 Hz (commercial application exportable) The FLIR Lepton is a radiometric-capable long-wave infrared (LWIR) camera module that is smaller than a dime. Parrot ANAFI Thermal Support center: Learn how to change the FLIR Lepton (thermal).The radiometric Lepton captures accurate, calibrated, and non-contact temperature data in every pixel. ![]() With a focal plane array of 80圆0 active pixels, this Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal image sensor. The FLIR Lepton® 2.5 - Thermal Imaging Module is a radiometric-capable long wave infrared (LWIR) camera solution that is smaller than a dime, fits inside a smartphone, and is less expensive than traditional IR cameras.
0 Comments
Leave a Reply. |